Aksa AAP 1000i, User And Maintenance Manual

Page: 31 / 42

27
A. Discharge the gas in the gasoline tank thoroughly into a proper container.
B. Turn the switch of the engine to the “close” position. Dismantle the oil-discharging
screw on the carburetor and discharge the gas in it into a proper container.
C. Screw down the oil-discharging screw on the lid of the spark plug. Pull the staring hold
for three or four times, and discharge the gas from the oil-spouting pump.
D. Turn the switch of the engine to the “close” position. Then screw the oil-discharging
screw tightly.
E. Re-install the cap of the spark plug on the spark plug.
3 . Change the machine oil.
4 . Dismantle the spark plug, and pour a big spoon of clean machine oil into gasoline tank.
Make the engine rotate for several circles to make the oil evenly distribute. Install the
spark plug again.
5 . Pull the starting hold slowly until you feel the resistance. At this time, the piston reaches
the compressed stroke, and both the entering and the discharging valve are closed.
To store the generator under such condition ill help to prevent the inside of the machine
rusting.
10. Examine and repair the breakdown
Starting Hold