Akrobat PRIMUS FLAT, Installation And User Manual

Page: 9 / 17

8
INSTALLATION AND USER MANUAL - PRIMUS FLAT
The last step to secure the frame pad to the
trampoline is placing springs into the “spring
loops”. You will find them on the underside of
the frame pad where each pad section joins
the next one. Remove a single spring under
every loop, slip it through the loop and reattach
to the frame. Repeat with all loops. This will
prevent the front of the pads from lifting up.
Important:
The frame pad must cover the
entire frame and all springs.
10
Flip the frame pad over and pull the elastic
band around the frame. Insert the toggle into
the loop, then rotate the toggle inwards to
secure it. Repeat with all frame pad elastics.
9
AKROBAT HINT:
If you find it too difficult to get the toggles in place, wedge a
screwdriver carefully between the frame and PVC panel to
attach the toggle. Using a flat-head screwdriver (or similar),
push the loop end between the wall panel and frame. Insert
the toggle from underneath and rotate to secure. Repeat with
all elastics.
Attaching the frame pad
Lay the safety pad on top of the trampoline, aligning the pad section joints with the joints of the frame
and the eyelets facing up. Insert the elastic toggles through the eyelets so the loop end of the elastic faces
outwards and the toggle end is on the inside.
8