4
Depending on the needs, the user can use one of two options to connect the hood as a
statement:
1) Outlet from the top - on the upper opening of the hood, we install a collar Ø 120 mm with
a non-return valve (Fig. 5)
Fig. 5
2) Outlet at the back - in the rear opening of the hood there are two wings, which should be
cut from the bottom (Fig. 6). In order to facilitate removing of the air curtain, cut the curtain
with a knife across the center (Fig. 7) and remove it through the upper hole (Fig. 8)
Then put the end cap on the upper hole (Fig. 9).
Summary of Contents for WK-7
