[AKD4103A-B]
<KM076804>
2015/08
- 6 -
Control Soft Manual
Evaluation Board and Control Soft Settings
1.
Set an evaluation board properly.
2.
Connect a USB control box (AKUSBIF-B) and an evaluation board.
Pay attention about direction of the 10pin header when connecting to an AKUSBIF-B.
3.
Connect a PC (IBM-AT compatible) and the USB control box (AKUSBIF-B).
The USB control box is recognized as HID (Human Interface Device) on the PC.
It is not necessary to install a new driver.
4.
Start up the control program.
When the screen does not display “AKUSBIF-B” at bottom left, reconnect the PC and the USB control box, and push
the [Port Reset] button.
5.
Proceed evaluation by following the process below.
[Support OS]
Windows XP / Vista / 7 (32bit) (XP compatible mode is recommended for Vista / 7)
64bit OS’s are not supported.
Figure 4. Window of [ FUNCTION]
