Date 2022-04-29
Akku Vision - Manual 4 A Charger for EBV E-Bike Battery with 26 V
S.
5
/
6
Index
05
Operation
1.
Before first use please check the parameters of the charger and your battery according the rating label or
the provided documentation to ensure the accordance.
2.
Check if that the local main AC voltage level is suitable for the charger. InputVoltage: AC 110-240V, 50-
60Hz InputCurrent: max. 2 A
3.
Plug in the mains cable into an AC mains socket.
4.
Now connect the DC cable to the battery pack.
Completion of the charging
1.
If the battery is fully charged, the charger stopps.
Notes
This charger has a wrong polarity protection. The right polarity is the base that the charger generates a charge
voltage. Depending on the battery safety board, a battery pack that is discharged under it’s nominal discharge
voltage can’t be charged again. In this case please contact Akku Vision GmbH.
Error through short circuit or wrong polarity will be reset automatically maximum 1min after removing the Problem.
The device has a temperature controll unit which will protect it against overheating and continuous overload. In this
case, the ouput will reduced until a stable operating temperature is realized.
Disposal
Electrical equipment marked with the cancelled waste bin symbol must not be discarded in the standard household
waste; instead it must be taken to a suitable specialist disposal system.
In the countries of the EU (European Union) electrical equipment must not be discarded via the
normal domestic refuse system (WEEE - Waste of Electrical and Electronic Equipment, directive
2012/19/EU). You can take unwanted equipment to your nearest local authority waste collection point
or recycling centre.
There the equipment will be disposed off correctly and at no cost to you. By returning your unwanted equipment
you can make an important contribution to the protection of the environment.
