Date October 2021
Akku Vision - Manual PowerPack compatible to Panasonic* Next Generation 36V
S.
7
/
9
Version 01
*Panasonic is a trademark of the Panasonic Corperation
LED 5
LED 4
LED 3
LED 2
LED 1
The Charging
Your new battery can be charged with the original charger, which was included when you bought your ebike.
When using the
E-Bike Vision charger in combination with the additional available charging adaptor
or when
using the
original charger
, you can
charge your battery inside or outside of the ebike
.
Requirements for charging within the ebike
The drive system must be turned off. Open the cap of the charge plug.
Requirements for charging outside the ebike
Charging outside
the ebike is started by turning off the drive system.
Please wait until all LEDs turned off. Now you can take out the battery by opening the lock and taking out the battery
and charge it inside your apartment or garage in your presence.
Start of charging process with the original charger
1.
Connect the charger to the mains.
2.
Now plug in the charging connector of the charger to the battery.
3.
Charging process start. The LEDs of the battery corresponding to its current state of charge begins to flash.
4.
If charging does not start immediately, please push the capacity indicator button of the battery and wait
until LEDs are lighting.
Naming of LEDs
During charging, the capacity is indicated by lighting and flashing of the battery’s LEDs as follows:
LED 1 flashing:
0 – 19 % charged capacity
LED 1 lighting and LED 2 flashing:
20 – 39 % charged capacity
LED 1,2 lighting and LED 3 flashing:
40 – 59 % charged capacity
LED 1,2,3 lighting and LED 4 flashing:
60 – 79 % charged capacity
LED 1,2,3,4 lighting and LED 5 flashing:
80 – 99 % charged capacity
LED 1,2,3,4 and 5 lighting:
100 % charged capacity
Break up of charging process
To complete the charging, switch off the charger and unplug the charging plug of the battery or out of the charge
plug of the frame. Pull the power plug of the charger from the wall socket.
Charging with your original charger is completed (State of Charge 100%), as soon as all LEDs are turned off.
