background image

  

   

 

 

 

 

 

 

 

 

                         

-

4

 -

   

 
Model No.: MMS-251.doc 
Version: 1.0 

 

   

IMPORTANT SAFETY MEASURES 

Before using this machine, please read all the safety and operating instructions, meanwhile, please 

observe all the indications about safe operating. These safety and operating instructions should be kept 

in condition consultation.   

 

1.

 

Protection electric power supply lines

: Be aware that the electric power supply is not 

tramped, pressed by heavy objects. Pay special attention to the plug of power supply line and 

the outlet on the machine. DO NOT lengthen the electric shock. DO NOT pull or drag or the 

power supply line. 

2.

 

Ventilation

: this set must be put in ventilated place. DO NOT push disk on it or cloth to 

cover it. The distance away from the wall should not be less than 10 centimeters. DO NOT 

put this set on the bed, sofa, carpet or other objects with similar surface in case of good 

ventilation. 

3.

 

Casing dismantling

: do not dismantle the casing. If the one touches the inner components, 

he will probably get serious electric shock. 

4.

 

Unusual smell

: when you discover unusual smell and smoke, shut off power supply 

immediately and pull out the plug from the outlet from the wall. Contact the sell shop or 

nearest repairing center. 

5.

 

Attention

: this set applies to 220V

240V 50/60Hz power supply. Use Standard power 

supply and do not use power supply of small output to adjust and steady voltage. 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Summary of Contents for MMS-251
















Reviews: