akira LCT-32PBSTP, Service Manual

Page: 38 / 96

-
38
-
Model No.: LCT-32PBSTP.doc
Version: 1.0
Remote control cannot work
properly
Check if the batteries are installed in the reverse order. Check
if the battery is effective. Check the distance or angle from the
monitor. Check if there is any obstruct between the remote
control and the TV set. Check if the remote control signal-
receiving window is exposed to strong fluorescence.
No picture and sound, but only
hash.
Check if the antenna cable is correctly connected, or if it has
received the video signal correctly.
Blur picture
Check if the antenna cable is correctly connected. Of if it has
received the right video signal.
No sound
Check if the “mute” audio frequency setting is selected. Check
if the sound volume is set to minimum. Make sure the
earphone is not connected. Check if the cable connection is
loose.
When playing VHS picture search
tape, there are lines at the top or
bottom of the picture.
When being played or in pause VHS picture search tape
sometimes can’t provide stable picture, which may lead to
incorrect display of the liquid crystal TV, In this case please
press “auto” key on the remote control so as to enable the
liquid crystal TV set to recheck the signal and then to display
correct picture signal