akira DVD-2102SE, Service Manual

Page: 5 / 29

5
Model No: DVD-2102SE(TS1)
Version 1.0
TROUBLESHOOTING
Before requesting service for this player, check the chart below for a possible cause of the
problem you are experiencing,
Some simple checks or adjustments on your part may eliminate the problem and restore proper
operation,
Symptom (Common)
Remedy
No power Insert the AC power plug securely into tile power outlet.
Play fails to start even when PLAY
is pressed. Play starts but then stops
immediately. • Condensation has formed: wait about 1 to 2 hours to allow
the player to dry out.
• This player cannot play a disc other than DVD, Video CD
and CD.
• The disc may be dirty and may require cleaning.
• Ensure that the disc is installed with the lable side up.
No picture • Ensure that the equipment is connected properly.
• Ensure that the input setting for the TV is “Video”.
No sound / Distorted sound • Ensure that the equipment is connected properly,
• Ensure that the input setting for the TV and stereo system are
correct.
Picture is distorted during rapid
advance or rapid reverse.
• The picture will be somewhat distorted at times' tills is
normal.
No rapid advance (or rapid reverse
play) • Some discs may have sections which prohibit rapid advance
(or rapid reverse).
No 4;3 (16:9) picture
• Choose the correct setup “TV SCREEN” item which matches
the TV set used.
No operations can be performed
with the remote control unit. • Check the batteries are installed with the correct polarities
(+ and -).
• The batteries are exhausted' replace them with new ones.
• Point the remote control unit at the remote control sensor and
operate.
• Operate the remote control unit at a distance of not more than
7 m from remote control sensor.
• Remove the obstacles between the remote control unit and
remote control sensor.