akira CT-34TP9ATS, Service Manual

Page: 31 / 32

31
Model No: CT-34TP9ATS
Version 1.0
Picture tube removal
CAUTION: Do not disturb the deflection yoke or magnet assembly on the picture tube Neck. Care
must be taken to keep these assemblies intact, unless picture tube is being replaced. Discharge the
picture tube to the coating before handling the tube.
1. Remove chassis, referring to chassis removal instructions.
2. Place cabinet front face down on the soft surface.
3. Remove the screw on each corner of the picture tube and GENTLY lift the picture tube out of
the cabinet.
4. Install a replacement picture tube in reverse order. Properly install the degaussing coil and
picture tube grounding lead on the picture tube. See Figure 2.
Note: If picture tube is being replaced, mount the Degaussing Coil on the picture tube. See following…
1
5
4
3 2
6
9
10