akira CT-21CBS5CPH Service Manual Download Page 4

 

     

 

Model no.:CT-21CBS5CPH.doc 
version 1.0 

4

 
 
 
 
 
 

SERVICE SAFETY AND MAINTENANCE 

 
 

 
 

WARNING

BEFORE EXAMINING AND SERVICING 

THIS CHASSIS READ CAREFULLY THE 

FOLLOWING  SAFETY  

INSTRUCTIONS. 

 
 

X-RAY RADIATION PRECAUTION 

 
 

 

1. 

The EHT must be checked every time the TV is serviced to ensure that the CRT does 
not emit X-ray radiation as result of excessive EHT voltage. The maximum EHT voltage 
permissible in any operating circumstances must not exceed the rated value. When 
checking the EHT, use the High Voltage Check procedure in this manual using an 
accurate EHT voltmeter. 

2. 

The only source of X-RAY radiation in this TV is the CRT. The TV minimizes X-RAY 
radiation, which ensures safety during normal operation. To prevent X-ray radiation, 
the replacement CRT must be identical to the original fitted as specified in the parts list.  

 

3. 

Some components used in this TV have safety related characteristics preventing the 
CRT from emitting X-ray radiation. For continued safety, replacement component 
should be made after referring the PRODUCT SAFETY NOTICE below.  

 

4. 

Service and adjustment of the TV may result in changes in the nominal EHT voltage of 
the CRT anode. So ensure that the maximum EHT voltage does not exceed the rated 
value after service and adjustment.  

 

 
 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for CT-21CBS5CPH






















































Reviews: