akira AR-A51G, Instruction Manual, Page: 6 / 16

6
¥ Place the refrigerator on a
hard and level floor.
An uneven floor may cause
the refrigerator to make
noise. ¥ Place your refrigerator
where there is no heat
source nearby.
High surrounding
temperature will lower the
cooling efficiency and
increase your electricity bill. ¥ Place the refrigerator in an
area with low moisture.
Splashing water or a high
moisture area may cause a
short circuit and cause
corrosion.
¥ Avoid places that are
exposed to smoke
Discolouration of the fridge
could occur. ¥ For good ventilation, place
the refrigerator with the
spaces specified on the
diagram.
This helps cooling efficiency
and lowers the electricity bill. ¥ Placing the refrigerator on
the carpet may cause heat
to develop and discolour the
appliance.
In such a case put a hard
wooden board or a rubber
mat between the
refrigerator and the carpet.
NO
NO
At least 6cm
At least 6cm
At least 30cm
Carpet
Wooden Board,
Rubber Mat
SAFE INSTALLATION PLACE FOR YOUR REFRIGERATOR
391 AIMS (AR-A51G) 01.10.31 5:42 PM ˘ ` 6