13
Disassemble motor and motor support
Screw off the 4 taping screws fixing the motor and remove the motor. Screw out the 2 taping screws and
remove the motor support by pulling upwards as shown in Fig B-6
Fig B-6
Disassemble 4-way valve(Only existing in cooling /heating unit)
Screw off the fixing nuts for the fixing the solenoids of 4-way valve and remove the solenoid. Wrap the
4-way valve with wet gauze and solder off the 4 soldering points of 4-way valve, remove the 4-way
valve. It is recommended to solder as quickly as possible and the cotton gauze should always be wet.
Make sure not to burn the leads of compressor as shown in Fig B-7.
(Remarks: prior to disassembling any pipe component or compressor, it should be sure that no cooling
refrigerant left inside any more.)
Fig B-7
Disassemble liquid divider assembly
ng the liquid divider assembly and other pipes as shown in Fig
Solder off the soldering points connecti
B-8.
Fig B-8
Model No.: AC-S13CEGVI.doc
Version: 1.0
Все каталоги и инструкции здесь:
http
:
//splitoff.ru/tehn-doc.html
