07
8. Trouble Shooting Guide
9. After Sales Service Information
If you have any problem that can’t be solved on your end, please contact
Akiles technical support (909)923-7778 or www.akiles.com
Problem
Cause
Solution
Machine has no
power or rollers are
not rolling
Power cord is not properly
plugged in
Power switch is off
Operation of gears is not
smooth
Laminated document is
wrinkled, damp, or folded
Check the power plug
Check that the power cord is
properly plugged in
Check that the power switch is
turned on or contact support
Turn off the machine, and
contact support
Adjust the temperature lower
or higher and / or adjust speed
Check that the power plug and
switch is turned on or contact
support
Use a thinner document or
leave more space around the
edges (approx. 5mm)
Document is too thick to
seal the edges of the film
Excessive noise
Bad lamination
No increase of
Temperature
Frequent curling
of film
Edge of document
is not sealed
Emergency state
Lower the temperature
Turn off the switch and
contact support
The temperature may be
too hot
Something may be stuck
between the heated rollers
or they are out of position
