Back
Cove
r
Back
Cove
r
Cover
Wire
BINDING (INSERTING & CLOSING)
1. Slide Document to be bound into the Wire Selector, to determine the correct wire size to use.
See picture 1.
2. Slide selected wire into the Wire Snatch.
See picture 2.
3. Insert document from last pages to first pages. Then insert front cover. The back cover should
be inserted last with the inside facing up.
See picture 3.
4. Take out inserted document from the wire snatch.
See picture 4.
5. Place inserted document into wire closure.
See picture 5 & 6 .
6. Pull closing handle down to close.
See picture 7.
7. Return handle to upright position.
8. Take document out and turn back
cover over. The binding is complete.
REMARKS:
The seam of the closed wire should be just
touching. Slightly adjust the bilateral closer
controls for under-closed or over-closed wire.
Last Page
Back Cover
Cover
Cover
