Rev.010918-BR
3
A. Wall Mount
Step 1: Measure and mark the (A) distance between the
two holes on each bracket.
Step 2: Drill a hole for each screw hole on the marked
areas. Insert a
dry-wall anchor
into the wall. Then screw
the
M5x60 Screw
in each
dry-wall anchor
in leaving
about 1/8” of an inch.
Step 3: Hang the screen by aligning the end cap holes to
the M5x60 screws
.
Step 4: please make sure the screen is on a line.
B. Ceiling Mount
Step 1: Measure and mark the (A) distance between the
two loops on each bracket.
Step 2: Drill a hole on all marked areas and insert
theM6.5 eyebolt screw into the hole, then screw up with
hammer.
Step 3: Attach the snap link through the eyebolt and
connect it to the loop on the screen’ end cap.
Step 4: please make sure the screen is on a line.
Wall
Side View
A
Ceiling
