08182020JA
www.akiascreens.com
U-00205
4
Step 5
: Secure the elbow joints by fastening them with
M4x7 screws (g)
, 4 at each corner.
Screen Material
TWO PERSON SETUP
Step 6:
Carefully and gently place the assembled frame on top of the screen material in the marked areas as shown
below. Make sure to not allow the angle edge of the frame to come in direct contact with the screen material to
avoid puncturing it.
Step 7:
Hook one end of the spring and secure inside the groove of the frame, use the
spring hook (h)
to attach the
spring to the hole located on the screen material’s outer edge in the following order.
2. Hardware Parts List
a.
b.
c.
d.
e.
f.
g.
h.
i
j.
k.
l.
m.
*Make sure the frame corners are positioned
in the marked areas of the material.
g.
h.
i.
CAUTION!
THE PROJECTION FABRIC IS A DELICATE OPTICAL/LENTICULAR SCREEN MATERIAL AND SHOULD NOT BE
FOLDED, BENT, OR CREASED. ALWAYS MAINTAIN SCREEN MATERIAL FLAT AND TAUT DURING SETUP AND
DISASSEMBLY. TWO PEOPLE ARE REQUIRED TO SETUP AND INSTALL THE MATERIAL TO AVOID PERMANENT
DAMAGE. ANY DAMAGES TO THE SCREEN MATERIAL WILL VOID YOUR WARRANTY.
