Ticket window
Conferencing
Surveillance and security
Boundary Layer Microphones
•
Hemispherical polar pattern; Clear, intelligible pickup of speech
•
Low profile, cylindrical design, perfect for wall or tabletop installations
•
Choise of mic level output (PZM
®
-10) or line-level output (PZM
®
-10LL)
•
PZM
®
-10 powered by 12-48V phantom power
•
PZM
®
-10LL powered by 12-24V DC
PZM-10
PZM-10LL
The PZM®-10 and PZM
®
-10LL, part of the Pressure Zone Microphone
®
line, are designed for security, surveillance, and conference-table use.
Since they do not look like microphones, they are inconspicuous. Each mic’s tubular housing mounts in a 25/32-inch diameter hole in a ceiling panel,
wall or table.
The PZM
®
-10 has a mic-level output and a 3-pin XLR-type connector for easy plug-in installation. The mic requires 12 to 48 V phantom power.
The PZM
®
-10LL has a line-level output from its unterminated cable. It requires 12 to 24 V DC. Like other Pressure Zone Microphones
®
, the PZM
®
-
10 and PZM
®
-10LL use a miniature mic capsule mounted very near a sound-reflecting plate or boundary, in the Pressure Zone. In this zone, direct
sound from the sound source combines in phase at all frequencies with reflected sound off the boundary. The benefits are many: 6 dB more
sensitivity, 6 dB less noise, a wide smooth frequency response free of phase interference, excellent clarity and “reach”, and consistent pickup
anywhere around the mic.
Frequencies below the voice range are rolled off to reduce pickup of air conditioning rumble. The high-frequency response is boosted slightly to help
articulation. Because of their tailored response and PZM
®
construction, the PZM
®
-10 and PZM
®
-10LL will pick up conversations or other desired
sounds with extra clarity and definition.
The output is balanced, low impedance, which allows long cable runs without hum pickup or high-frequency loss. The mic’s humbucking transformer
and steel case prevent hum pickup, even near fluorescent lights.
.