AKE PowerCom, Manual

Page: 9 / 16

Stealth - Bluetooth
®
zum Helm - Extension Set
Extends the wired Intercom with Bluetooth to the helmet. Every set comes with one
AKE Stealth Bluetooth Helmet Set 201 and one suitable AKE Bluetooth Helmet
Connector switchable for Duplex or Stereo transmission. Suitable Bluetooth Ex-
tension Sets are deliverable for:
AKE PowerCom
with build in mic. / with boom mic. for open helmets
31440 / 31441
Baehr 5-pol.DIN
with build in mic. / with boom mic. for open helmets
31444 / 32454
Harley Davidson
with build in mic. / with boom mic. for open helmets
31450 / 31451
Honda Goldwing
with build in mic. / with boom mic. for open helmets
31445 / 31449
PowerCom Bluetooth Helmet Connector PB-HC2 D&S
Bluetooth dongle to wireless connect a Bluetooth helmet set to the PowerCom system
(please ask for other communication systems), supporting A2DP and headset profile,
power from PowerCom system, therefore no charging necessary.
39303
PowerCom Bluetooth Accessory Adapter
Bluetooth extension to connect all PowerCom systems with a Bluetooth capable GPS, mobile phone, etc.
Power from
PowerCom system, therefore no charging necessary.
PB AA S , supporting A2DP and enables the connection of mono and stereo audio devices 39321
PB AA D , supporting HFP and enables the connection of mobile phones and two-way radios 39320
PB AA D&S , connecting mobile, GPS and stereo audio combi-devices at On Tour and Innova 39300
BT AA D&S , connecting mobile, GPS and stereo audio combi-devices at 6-pin DIN (e.g. Baehr) 39322
Bluetooth Musik Transmitter
Your audio device is without Bluetooth? With this small box you can make your
audio equipment Bluetooth capable. Jack plug connection 3,5mm
39310
Helmet Assembly Components
Protective bag for AKE Bluetooth Helmet Set 201 / 201i
Simplifies the assembly of the electronic box in helmets without neck guard 39311
Boom microphone P-BM1
High quality helmet microphone with small
housing, flexible boom for mounting in
helmet, noise compensating microphone capsule, replaceable foam windshield,
can be used for all Bluetooth Helmet Sets and for PowerCom series
32351
Gooseneck microphone MFJ D10
Noise compensated gooseneck microphone
with one-hole mounting outside of helmet,
dynamic transducer, for the PowerCom series
32352
High-quality helmet microphone PowerCom HM1
For very loud surroundings, extremely good driving and wind noise compensation,
for full-face helmets
without mini-spiral cord 32371
and flip-up helmets with mini-spiral cord 32372
Mini-spiral cord
For the fixed installation into flip-up helmets. The mini-spiral cord provides a flexi-
ble connection between helmet shell and flexible chin part.
32330
– 9 –
AKE Plug & Play Service: all sets are
already paired ex works!