AKE ECC basic, User Manual, Page: 8 / 20

8
Connecting latecomers or temporarily switched off devices
All devices of a team connect automatically, when they are switched on within 2 minutes each.
After this time, the connection can be established manually as follows (the team leader
must be switched on): Press the multifunction button

for approx. one second if the
voice connection is active and switch on the latecomer. The search is visually signaled to
the team leader,
Display:
—
•
.
Hirachie change (team member becomes team leader)
(Only available at ECC silence)
Only
switch on the team leader device, red-blue alternating flashing
—
•
and briefly
press the Minus key once. This deletes the team leader function. Then switch on all
participants promptly and turn a device into a new team leader / repeater by briefly
pressing the Plus key once - all connections will now be established within approx. 30
seconds.
If the device was not yet a team leader, it first goes into pairing mode and saves the new
team composition.
Multiple team leaders work alternately
(Only available at ECC silence)
Any number of team leader devices can be paired with the team and then alternately
connected to the team. To do this, switch off the old team leader device and then quickly
switch on the new team leader device. The devices connect automatically.
Note that only one team leader at a time may be in the team!
We recommend labeling the team leader device accordingly.
Automatic swap for additional employees
(Only available at ECC silence)
If you have paired more than four devices, all others devices can be connected in swap mode:

Turning off a device connected to the team leader

Switching on a paired but not currently connected device (within 2 minutes)
The team leader device now automatically
connects the new entry with the team.
Commissioning of the Bluetooth ® -interface
The integrated Bluetooth ® interface enables the wireless connection of a smartphone, etc.
with the profiles HFP and AVRCP (recommended from version 4.0).
Pairing with a Bluetooth
®
device
Switch on only one ECC hands-free system by briefly pressing the multifunction button

red and blue alternating flashing indicates the pairing- • • or search mode
—
• . Bring
the Bluetooth
®
device to be paired into pairing mode as well. The ECC system remains in
pairing readiness for other Bluetooth ® devices for one minute, as long as it is not
connected to any other ECC device.
If other ECC units are connected,
You should turn it off when pairing with other Bluetooth ® devices.
For menu-driven phones, you'll typically find the option "Search for nearby Bluetooth
devices". If you select this function then the AKE ECC system should be displayed for
pairing. If you are asked for a password after confirming, enter 0000. For instructions on
pairing Bluetooth® devices, refer to their respective manual.
!

!