USER INSTRUCTIONS
1. Any repairs to this appliance should be carried out by qualified / authorized
service personnel only.
2. Under no circumstances should this appliance be modified parts having to be
removed for servicing must be replaced with original “OEM “(original equip-
ment manufacturer) parts only.
3. This firebox is to be cleaned with a damp cloth (water) only.
4. Please unplug this firebox when not in use.
IMPORTANT
: Always unplug the power cord before cleaning the unit. Do
not use any abrasive cleaners on the unit.
GENERAL INSTRUCTIONS
Unpack the electric fireplace carefully and retain the packaging for possible
future use, In the event of moving or returning the fire to your supplier.
The electric fireplace incorporates a flame effect, which can be used with or
without heat..
Before connecting the electric fireplace, check that the supply voltage is the
same as that stated on the electric fireplace.
ELECTRICAL REQUIREMENTS
WARNING
– THIS APPLIANCE MUST BE EARTHED
This electric fireplace must be used on AC supply only and the voltage
marked on the electric fireplace must correspond to the supply voltage.
Before switching on, please read the safety warnings and operating instruc-
tions.
WARNING
: Electrical outlet wiring must comply with local building codes
and other applicable regulations to reduce the risk of fire, electrical shock and
injury to persons.
WARNING
: Do not use this fireplace insert if any part of it has been under
water. Immediately call a qualified service technician to inspect the firebox and
replace any part of the electrical system which has been under water.
LOCATION REQUIREMENTS
When choosing a location for your new fireplace, ensure that the general
instructions are followed. Also, for best effect install the fireplace out of di-
rect sunlight.
It is safe to set the fireplace close to non-combustibles.
DO NOT STORE OR USE GASOLINE OR OTHER FLAMMABLE VAPORS
OR LIQUIDS IN THE VICINITY OF THIS OR ANY OTHER APPLIANCE.
Instructions & Requirements
