LED information for SP1+ units
1st LED (near power LED): status of Dry Contact
2nd LED: status of Embedded Temperature Sensor
3rd LED: status of the RJ45 sensor plugged in
The
Power/Ethernet LED
will become red if there’s no network connection, and
blinking green (according to LAN activity) when the connection is normal.
For
Sensor LEDs
(green):
Off = offline
On = online and normal
Slow blinking = Warning status
Fast blinking = Critical or Error status
LED behavior for Reset button:
- 0 .. 3 seconds: Broadcast IP address and show it on connected LCD sensors
LEDs unchanged.
- 3 .. 7 seconds: Reboot device
Dry Contact LED
fast blinking,
Sensor Port 1
and
Temperature Sensor LEDs
also
blinking fast.
