SEC Internal Modem Manual
- 3 -
Introduction
In this manual we will show you how to set up the Internal Modem module on the SEC.
The SEC Internal Modem allows you to save space and reduce clutter: as an internal module, no
additional USB or audio cables are required, and most of the external modem features are supported
(see below for details).
It also has an attacheable external antenna that can improve signal strength.
There are very few changes in the SEC Web UI; you could configure and use the Internal Modem
exactly the same as the other external modems in the notification wizards.
For this reason, we don’t go into details on how to set up each notification or action; please refer to
the
EDGE 180 GSM USB Modem Manual
or the
HSUPA 3G Modem Setup Manual
for setting up
the notifications. However we will point out the differences for each action, where it’s required.
The front panel of the SEC with the Internal Modem includes a slot for the SIM card with its yellow
eject button, and an antenna jack for the attacheable external antenna:
Note: There is no auto-detection for the modem module; you have to visually inspect the front panel
to check if the module is present in your unit.
The SEC Internal Modem only supports the following functions:
•
SMS alerts
•
Telephone Call with text-to-speech
and acknowledgement
•
OpenVPN client (it works the same way as all other SEC modems; see the VPN manual)
•
Dial-Out Modem configuration
Not supported with the Internal Modem:
•
Dial-In feature
•
Telephone call with WAV file playback support (it will be done in a later firmware version)