ILPM-AC Manual
3
What is the Inline
Power Meter - AC Version
The ILPM is an
“in-line” AC
power
meter that is connected between the electrical source
and
the a
power strip, or
an
AC
voltage
equipment, monitoring the voltage (V), current
(A) and Kilowatt Hours (kWh) being consumed with billable grade accuracy. Remotely
switch devices
on with
an optional relay. The relay is a Bi-Stable Latched relay, which
retains its state regardless of whether it is receiving power or not.
Essential Benefits
Check how close you are to tripping your circuit breaker
Ensure sufficient power overhead before adding new equipment to a circuit
Bill individual clients in co-located services
Monitor up to 16 Inline
Power Meters from a single sens or SEC+
The AC ILPM comes in either a 16A or 32Amp version. AC Voltage rating = 110AC to
220VAC. Please refer to the product datasheet for specific part numbers and connector
types.
Very Important note:
The ILPM is ONLY compatible with the SP+ (SP2+, SPX+ &
SEC+) base units and will not work on the securityProbe or sensorProbe family of base
units. They also are not compatible with any version of the
AKCess AKCP
Pro Server
prior to v13.0.
Rules for Safe Operation
•
To avoid possible electric shock or personal injury, and to avoid possible damage
to the ILP
M sensor Meter
, or to the equipment being connected
,
to,
please adhere to
the following rules:-
•
Before using the ILPM
,
inspect the housing. Do not use the ILPM if the housing
or any portions of the power input and output connectors are damaged.
•
DO NOT connect the ILPM, or the power plugs to the AC power input source
without first cutting or disengaging the AC power that will connect to the ILPM
power input connection.
•
When connecting the AC power plugs, or direct AC lines/cables to the ILPM’s
make sure you are connecting the positive
(Line or Hot Phase)
, negative
(Neutral
or Return Phase)
and ground
(Protective Earth Ground)
correctly.
•
Ensure that the sens or
securi
base units, and the equipment
being connected to
is are
properly grounded.
Formatted:
Font: (Default) Arial, 12 pt
Formatted:
Normal, No bullets or numbering
Formatted:
Font: (Default) Arial, 12 pt
