EDGE 180M USB Modem Manual
- 3 -
Connecting the USB modem to your PC.
You can download the drivers for this from
this link here;
http://homepage.seed.net.tw/web/lightspeed/
Note
: It is always a good idea to first test out the modem on your PC to ensure the SIM
card is working and can connect before setting it up on your base unit.
Connecting the EDGE-180M USB Modem to the securityProbe 5E,
5ES, or 5ES-X20/X60 and 5ESV, 5ESV-X20/X60 base units
Very Important Note:
Before connecting the EDGE-180M USB modem to your base
unit you need to insure that your unit is running firmware version 404f or above or it will
not work. You can download the latest firmware from our web site after setting up your
support page. If you’re not sure how to do this please contact [email protected].
You will first physically connect the USB modem to the base units USB port located on
the back of the unit using the USB extension cable provided with the modem.
