AkcesMED PARAMOBIL, Manual

Page: 17 / 32

In static version, at the beginning, disassemble connector of pipes from the
pelot-pads (picture 11) and assemble seat. Next, when patient safely seats,
screw off the feet stabilizer and knee stabilizer. Saddle should be screw tight with
standing frame's frame using the 4 screws wich are added as standard
equipment.
CAUTION!
If you don't screw it tight enough or if you don't
use all 4 srews the binding plate can deflect. In such cases the
complaints will not be taken into consideration
.
- Mechanical version – patient uses strength of his muscles.
- Electric version – work of electric engine is used. In order to this, please
connect protective transformer (look Picture 9, page 12) .
The next step is installation of mechanical-electric rotor (look page 12 ) and
connection of protective transformer. Patients' feet should be placed on rotor's
feet holders and Velcro stickers should be fastened. Shin also should be
supported by Velcro fasteners. After accomplishing the above-mentioned
actions you can start exercises:
Rotor's resistance regulates with a knob (look Picture 9, page 12) .
After exercising with standing frame PARAMOBIL™ patient must return safely on
wheelchair, chair, armchair, bed etc.
Do not leave the rotor on if patient doesn't use it. The electric
engine can be blocked and can burn or can be mechanically
damaged. In such cases the complaints will not be taken into
consideration. Repair cost will be cover by user.
During using of electric rotor patient should seat on saddle
comfortable. Unacceptable is to stand by patient onto rotor's
pedal.
CAUTION! Before switching on the transformer to plug-in
socket, please switch off the knob that regulates the resistance
of engine. Not applying to the above-mentioned
recommendation can result in burning of electric engine!
17
:
www.akces-med.com
'
+48 17 864 04 70
*
export@akces-med.com
PARAMOBIL