TECHNICAL INSPECTION
Technical inspections should be performed regularly. Before servicing, the product
should be thoroughly cleaned to reveal any hidden damage.
Frequency
What should be checked? What should be done?
Remarks
the product.
General condition of
ź
if the product complete,
Check:
ź
if all bolts, screws, knobs, nuts and other
elements of the construction are
complete and tightened..
ź
the entire product for any visible damage,
cracks or mechanical defects,,
In case of any damage or defects,
discontinue the use of the product and
contact your Supplier/Distributor or the
Manufacturer.
Wheels and brakes.
ź
if the wheels are properly mounted and if
they are not damaged,
ź
if the brake is blocking the spinning
wheel,
ź
if the wheels are not dirty. If necessary,
clean the wheels.
Check:
In case of any damage or defects,
discontinue the use of the product and
contact your Supplier/Distributor or the
Manufacturer.
Fastening of
the construction elements.
ź
if the adjustment mechanisms of the
following elements work properly (if
applicable): headrest, backrest, seat,
abduction block, armrests, footrests.
ź
if the wheels are properly mounted (if
applicable),
ź
if the seat is properly mounted (if
applicable),
ź
if the elements securing the user are
properly mounted and if they work well (if
applicable),
Check all the mechanisms of the product
a n d i t s m o v i n g p a r t s . C h e c k i n
particular:
ź
if all the moving parts are complete, work
properly, do not jam,
In case of any damage or defects,
discontinue the use of the product and
contact your Supplier/Distributor or the
Manufacturer.
Upholstery elements.
ź
if there is any damage, tears, rips, loose
s e a m s o r d e f o r m a t i o n s o n t h e
upholstery elements,
ź
if the stabilizing straps, vests or safety
belts are not frayed or twisted and if the
buckles work properly,
Check:
ź
if the stabilizing straps, vests or safety
belts work correctly and do not unfasten
under pressure or when pulled.
In case of any damage or defects,
discontinue the use of the product and
contact your Supplier/Distributor or the
Manufacturer.
Before each use.
Once a week.
Product cleaning.
If the frame and upholstery get dirty (dusty,
muddy, etc.) during everyday use, wipe
them with a damp cloth without detergents.
Remove dirt (e.g. hair, food remains, etc.)
from the moving parts of the product.
The product should be cleaned when
necessary, but at least once a week. Do not
use any chlorine based cleaners or
methylated spirit. Before using the
product, check if the upholstery is dry.
24
:
www.akces-med.com
'
+48 17 864 04 70
*
Summary of Contents for PARAPION
Page 1: ...P A R A P I O N STANDING FRAME USER MANUAL ...
Page 27: ......
