Akces-Med DALMATIAN INVENTO, User Manual

Page: 17 / 40

DALMATIAN INVENTO
17
:
www.akces-med.com
'
+48 17 864 04 77
*
export@akces-med.com
II. LYING FUNCTION
If you wish to adjust chair to lying position it
is necessary to adjust two footrest and
backrest horizontally. Points 5 .2 and 5 .4 b
clearly show how footrest and backrest
should be adjusted.
Knee support in lying position
a) Knee support in lying position is
mounted on upper part of abduction block
;
b) Adjust the height of knee support with
the aid of knob situated at the front of
abduction block ;
c) It is possible to adjust standing frame.
Please follow steps described in point
5 .5
( Look point 5 .5, Knee support, page 1 3) .
Please follow these steps so as to adjust the tilt
angle of upper part of upper limb support
•
loosen fastening knob ,
•
adjust the tilt angle at your discretion ,
•
tighten fastening knobs .
CAUTION!
function, the depth of the seat should be put down to a
minimum!
When configuring the device for the lying