Assemble Baby Playpen
1. Take playpen out of carry bag.
(as pic1
）
Photos are for reference only
Parts Details
4
3
2
1
playpen
Mattress Second Bassinet
Anti-slip part
tubes×2
Carry bag
2. Take of f Velcro at mattress padding, then take out the playpen.
(as pic2
）
3. Separate the 4pcs plastic parts top corner at the upper position of
playpen to the largest distance, and try to gather the plastic parts
under playpen.
(as pic3)
separately , to lock the folding mechanism of dif ferent steel tubes.
ATTENTION: Make sure the central locking mechanism to upper
le vel, otherwise the locking mechanism among steel tubes unable to lock.
W
ARNING:
Before using playpen, make sure the
folding mechanism among long rails and short rail been
locked completely, otherwise could hurt childrens.
5. Press down the central locking mechanism until lock it completely 4pcs
plastic parts support under playpen been separated automatically,
playpen been unfolded completely
（
as pic5-1)
Lift the central plastic on the unfold rail and rotate half a circle to lock it.
（
as pic5-1)
.
A
TTENTION:
Unlock Velcro of fabric cap above the central locking
mechanism to open fabric cover, try to pull red handle of the locking
mechanism to make sure if it been locked completely .
.
The button of
locking mechanism should spring out at this moment, the button level
should more higher than the central locking mechasnism.
Please make sure all folding mechanism at long rails and short rails been
locked completely
.
(as pic3)
4. Lift up the steel tube on 3 rails among 4pcs plastic parts top corner
