20
Instructions (Cont.)
Fuzzy logic function
For certain wash programs, the machine automatically detects the weight of your
wash load and selects the appropriate wash cycle processes.
• For the NORMAL and HEAVY DUTY programs, the machine will automatically
select the correct water power and level, wash and spin time, and rinse type.
• For the CUSTOM and SOFT WASH programs, the machine will automatically select
the correct water level. Other wash cycle processes have to be manually set.
Ultrasonic function
This top load washing machine is equipped with an ULTRASONIC pump, which
generates thousands of vibrations per second into the wash tub. These vibrations
help remove stains and dirt without chemical stain removers, thus reducing the
required detergent amount and wash time.
To select this feature, press and hold the PRESET/ULTRASONIC button for four
seconds until the corresponding light comes on and a buzzer sounds. Repeat the
steps to cancel.
• When selecting the ULTRASONIC wash, please use less detergent than usually.
Power failure backup
A power failure backup will be activated when the power is suddenly disconnected
while the machine is running. When the power is back on again, the washing machine
will automatically start again and complete the remaining process.
Memory function
When the NORMAL, CUSTOM or HEAVY DUTY program is selected, 20 seconds
after starting, the machine will remember this program (except for the preset time and
water level setting) and start the same program the next time it is selected.
NOTE:
This function is not available for the SOFT WASH, BLANKET and DELICATE
programs.
Child lock
The machine will stop working automatically and sound an alarm if the washer lid is
opened for 4 seconds. To set the child lock:
• Press the POWER ON/OFF button to switch on the power, then press and hold
the PROGRAM button for 4 seconds until a buzzer sounds. The child lock will be
activated when the START/PAUSE button is pressed. Repeat the steps to cancel.
Start of washing
Washing will start when the water inside the tub has reached two levels below the set
level while the water will continue to flow in (see page 15 for the eight water levels).
This early start of washing will increase the wash time and allow the detergent to
dissolve fully before the start of the set wash time. This function will be ineffective:
• When water level 1 (28L) or 2 (35L) is selected.
• When the DELICATE or BLANKET program is selected.
• When SOAK is selected, after the soaking process.
Summary of Contents for XQB100-Y1066S
Page 26: ...26 Notes ...
Page 27: ...27 Notes Cont ...
