7
USING YOUR APPLIANCE
BEFORE FIRST USE:
•
Remove the product from the box.
•
Remove any packaging from the
product.
•
Please retain all packaging until you
have checked and counted all the parts
and the contents against the parts list.
•
Your appliance is now ready for normal
use.
ADJUSTING THE STRAP:
This unit is fitted with an adjustable carry
strap, for easy portability. This strap can
be adjusted or laid flat against the unit, if
required.
1. To adjust the size of the strap, unclip
it from the press stud and loosen or
tighten it as required.
2. Once the strap has been adjusted to the
desired size, clip it back onto the press
stud to secure it into place.
POWERING ON AND CHARGING THE
BATTERY:
This unit is equipped with a rechargeable
battery, and can be charged through the
included DC5V/USB charging port.
1. Insert the micro-USB end of the
included USB cable into the DC5V port
at the back of the speaker and the other
into a compatible mains adaptor or USB
port. A red LED light will come on in
the unit’s control panel to indicate the
device is charging.
NOTE: It’s recommended to fully charge the
battery before first use.
2. Once the device has finished charging,
the red light will turn off.
3. When the device has finished charging,
unplug the USB cable from the unit.
4. If charging through a USB adaptor,
take care to switch the mains outlet off
before removing the cable.
5. If charging through a laptop or similar
device, take care to unmount the USB
cable before removing it from the unit.
To unmount the USB cable, use the
device management menu on your
laptop or computer.
TURNING THE UNIT ON AND OFF:
1. Long-press the Power On/Off button to
turn the unit on. There will be a sound
prompt and the LED indicator on the
unit’s control panel will light up to show
the unit is turned on. There will be
another sound prompt a few seconds
later to indicate the unit is ready for
Bluetooth pairing.
2. Long-press the On/Off button again
while the unit is in operation to turn it
off. There will be a sound prompt and
the LED indicator on the unit’s control
panel will go out to show the unit has
been turned off.
BLUETOOTH PAIRING:
1. To connect the unit to Bluetooth, start by
long-pressing the Power On/Off button
to turn it on. There will be a sound
prompt and the LED indicator on the
unit’s control panel will light up to show
the unit is turned on.
2. There will be another sound prompt a
few seconds later to indicate the unit is
ready for Bluetooth pairing.
3. Once the second prompt sounds,
turn on the Bluetooth function in your
external device and look for “A58086”.
4. Select the speaker name and pair it with
your device. If a password is required,
press “0000”.
5. There will be a sound prompt to indicate
the speaker has successfully paired with
the source device.
6. If pairing is unsuccessful, restart both
devices and repeat the steps above.
