manualshive.com logo in svg

Akai S5000, Operator'S Manual

Share
Download
Akai S5000 Operator'S Manual Download Page 124

114

Version 1.21

EDIT PROGRAM

s5000

/

 

s6000

FILTER MODE

Here you can select from one of the 26 different resonant filter types.
These are:

2-POLE LP

This is a 12dB/Octave lowpass filter with resonance.

4-POLE LP

This offers a 24dB/Octave lowpass filter with
resonance. This does the same as the 12dB/Octave
filter except that the roll-off slope is steeper. Thus
high frequencies are attenuated more dramatically
giving what some people refer to as a ‘punchier’sound
compared with the slightly ‘fizzier’ sound of the 2-
POLE lowpass filter.

2-POLE LP+

This is another  12dB/Octave lowpass filter but with
enhanced resonance.

2-POLE BP

This is a resonant bandpass filter with a 6dB/Octave
roll-off slope either side of the band.

4-POLE BP

This is a resonant bandpass filter with a 12dB roll-off
slope either side of the band. This has a similar effect
to the 2-POLE bandpass filter but its steeper rolloff
attenuates the harmonics more profoundly.

Summary of Contents for S5000





































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands