Akai QX-4100, Operator'S Manual, Page: 5 / 7

LISTENING TO THE TUNER
1. Press the POWER ON/OFF (22).
2. Press the TUNER Button(9), the TUNER LED Indicator(25) will light up.
3. Open the Control Button Cover(17).
4. Select AM/FM band by the Band Switch (14).
5. S e l e c t yo u r r a d i o s t a t i o n b y t u r n i n g T U N I N G K n o b ( 7 & 2 8 ) a n d a d j u s t t h e vo l u m e l e ve l b y pre s s i n g
VOLUME / Button(21)
6. Press X-BASS Button(19) if extra bass is desired. The X-BASS LED indicator(5) will light up.
FOR BEST RECEPTION :
FM :
Loose the FM Antenna wire(33), when select the stereo mode by the MONO /STEREO Push Switch(13), and the stereo
broadcast was received, FM STEREO LED(2) will light up.
AM : This unit is equip with a built-in directional ferrite antenna, so move and rotate the unit.
7. To stop listen the radio, press the POWER ON/OFF (22).
- GB- 7 -
CONNECT THE SPEAKER
1. Loose the Speaker Wire(35) and connect to the Speaker Terminal(31),
BLACK/WHITE wire connect to RED terminal,
BLACK wire connect to BLACK terminal.
2. Locate two speakers to a far distance can get the good stereo effect.
Black &
White
Black
REMOTE HANDSET
1. STAND BY : turn unit on/off (STANDBY mode)
2 . CD : turn CD mode on
3 . SKIP / SEARCH :
skip the CD track or search within a track.
4 . / - : turn volume up / down
5 . PLAY : play or pause CD play
6 . STOP : stop CD play
7 . TUNER : turn tuner mode on and select waveband
USE OF REMOTE CONTROL
1 . Open the Battery Compartment
2 . Insert two AAA batteries (not supplied), make sure to match
“+” and “-” of the batteries to marks in the battery
compartment.
3 . Close the battery compartment.
4 . Point the remote control at the remote sensor, operate in the range of 5 meters and 60º from the front of the
remote sensor. Make sure there is no barrier between them.
Notes: 1. Batteries can last for about 6 months generally. Change the batteries if the remote control does not work.
2. If the remote control is not used for a long time, remove the batteries to prevent battery leakage.
3. Do not charge, heat open, or short-circuit the batteries. Do not throw batteries into a fire.
4. Use only the size and type of batteries specified.
5. Do not mix different types of batteries together (e.g. alkaline and carbon-zinc) or old batteries with fresh ones.
6. Weak batteries can leak and severely damage the unit.
7. Always remove batteries as soon as they become weak.
8. For the best performance it is recommended the batteries of remote control handset be replaced on a
yearly basis, or when remote control operation becomes erratic.
PRECAUTIONS FOR DISCS
HANDLING DISC
- To keep the disc clean, do not touch the play sides of the disc.
- Do not attach paper or ape to the disc.
- Keep the disc away from direct sunlight or heat sources.
- Store the disc in a disc case after playback.
CLEANING DISC
- Before playback, wipe the disc outwards from the center with clean cloth.
- Do not use any type of solvent such as thinner, done by qualified service personnel.
PLACEMENT
- Put the unit where ventilation is good enough to prevent overheating.
- Never put the unit in direct sunlight or near heat sources.
- Put the unit horizontally, never put any heavy object on the unit.
- To protect the pickup, do not put the unit where there is much dust. If there is dust on the pickup, use a cleaning disc to clean it.
- Refer to the operation instructions of the cleaning disc you bought.
LISTEN TO THE CD
1. Press the POWER ON/OFF (22).
2. Press the CD button(8), the CD LED Indicator(24) will light up and the CD Track Number Display(1) will show “ ”.
3. Insert the disc (Label side up) to the CD Compartment(29 & 30), the total number of track is displayed(1).
4. Press CD PLAY/PAUSE Button(10) to start playing and adjust the VOLUME level(21).
5. Press the X-BASS Button(19) if extra bass is desired. The X-BASS LED indicator(5) will light up.
NOTE : Use also CD PLAY/PAUSE button(10) to suspend momentarily the playing track. The current track number
blinks on the display(1), and press again to resume play.
6. Press CD STOP button(11) to stop listen the CD.
OTHER CD PLAYER FUNCTIONS
CD SKIP/FAST SEARCH Button(18) : Press to skip forward to the next track or repeatedly to skip several
tracks. Press Button return to the beginning of the track, or press repeatedly to skip backward several tracks. Press and
hold the or button to search quickly within a track.
REPEAT BUTTON(15) : A single Track or whole CD can be repeated as any time as you like.
a) Press once to repeat your select track, the REPEAT LED (3) will blinks
b) Press twice to play the disc continuously, the REPEAT LED (3) will light up.
c) Press again to switch off this function.
MIX BUTTON(12) : Press to play randomly all the track & REPEAT ALL, the MIX LED(6) and REPEAT LED will light up and
the selected track number are displayed(1).
- GB- 8 -
CONNECT THE HEADPHONE
1. This unit can accept stereo headphones (not included) with a 3.5 mm plug and an impedance of 32 ohms or greater.
2. Connect your headphone to the phones jack (13) of the unit, and the speakers will cut off automatically.
This set operates at AC 230V - 50Hz
1. Insert the AC Power Cord(32) into a convenient standard outlet.
Note: If the unit is switched off by pressing the STANDBY button on the remote control, it will be kept in the memory of
standby. To turn on the unit:
- by presing the STANDBY button on the remote control or
- by pressing the POWER ON/OFF button (22) on the unit. Wait for about 5 seconds, press the same button again. The unit
will be reset to tuner mode and the tuner LED indicator (25) will light on.
POWER SUPPLY