manualshive.com logo in svg

Akai PDP4216M, Service Manual, Page: 86 / 86

Share
Download
Akai PDP4216M Service Manual Download Page 86

Software upgrade Process 

 

- Power Switch OFF. 

- Connect the serial port of the control device to the RS-232 jack on the PDP back panel. 

   RS-232C connection cables are not supplied with the PDP. 

- Power Switch ON. The power indicator on the front of the panel should now display red, means    

  that the  PDP is in standby mode. 

- Copy the software (Flash Upgrader) to the computer. 

- Open the software (Flash Upgrader.exe) 

- Point "Flash" on the interface of the Flash Upgrader.exe. 

- Press STANDBY button on the front panel or POWER button of Remote control, Power indicator 

  green, the PDP is in power ON mode, software start upgrader immediately. 

- Waiting for the upgrader programing, when it is finished, the PDP will auto power on. 

- After the upgrader

 

is finished, shut down the power switch, take out the RS-232C connection 

  after the power indicator is extinguished. 

 

Note: The computer and PDP must be keep 

Power ON 

in the software upgrade processing. 

 

All manuals and user guides at all-guides.com

all-guides.com

Summary of Contents for PDP4216M























































































Reviews:

No comments