Akai PDP4210EA1, Service Manual

Page: 10 / 77

Technical Specifications PDP4210EA1
Note: Press CH +/- button on the remote control can turn on TV set from standby mode.
If the volume is too loud from the other external devices (such as, DVD, VCR, etc.), we
suggest that you press VOL +/- button to adjust the volume of PDP into appropriate.
If the volume of the other external devices (such as, DVD, VCR, etc.) and PDP are too
loud, the audio quality will be influenced.
Insertion of Batteries:
- Turn the remote control upside down, press and slide off the battery cover.
- Insert two 1.5V (AAA) batteries into the compartment, take care to observe the

and

markings indicated inside.
- Replace the cover and slide in reverse until the lock snaps.
P. Mode
:
Press repeatedly to cycle
through the picture mode: Cinema,
Normal, Vivid, Hi-Bright and User.
System : Press repeatedly to cycle
through the system options: AUTO,
NTSC 3.58 and PAL. (Only for AV
or S-Video)
Recall : Press to return to previous
channel.
Sleep : Press repeatedly until it
displays the time in minutes (15 Min,
30 Min, 60 Min, 90 Min, 120 Min and,
Off) that you want the TV to remain
on before shutting off. To cancel sleep
time, press Sleep button repeatedly
until sleep Off appears.
Red : Press this button to access the
red item or page.
Blue : Press this button to access the
blue item or page.
Green : Press this button to access
the green item or page.
Yellow : Press this button to access
the yellow item or page.