( SEARCH ) to locate a specific point on a track. The system will search at high speed
19
USB OPERATION
INSERTING USB FLASH DRIVE
1. Insert a USB flash driver into the USB socket on the front of the main unit.
2. Make sure that USB is selected as the audio source.
See "SELECTING THE AUDIO SOURCE”
3. Press PLAY/PAUSE to start playback.
PLAY/PAUSE
1. To start playing, press the
PLAY/PAUSE
button once, the currently track number and
PLAY indicator will appear on the screen. (“USB” will be shown on the screen).
2. To temporarily stop playing, press the
PLAY/PAUSE
button, the PAUSE indicator will be
shown on the screen.
3. To resume play, press the
PLAY/PAUSE
button again, the PLAY indicator will be shown
on the screen.
STOP
If the
STOP
button is pressed in the course of playing, the USB playback will cease to play.
SKIP PLAY
In stop or playback mode, you can skip up or down to a specific track by pressing the forward
or back
SKIP
Button.
ENTER A TRACK NUMBER TO PLAYBACK
1. Press the
TRACK
button once, the track number and total track number will be displayed.
The track number will be blinking for user selection.
2. Press the
SKIP
or
SKIP
button to select a desired track.(if the number of tracks is
less than 10)
3. If there are 10 or more tracks on the media, the first digit of track number will be blinking.
4. Press the
SKIP
or
SKIP
button to adjust the first digit.
5. Then, press
TRACK
button again to advance to second or third digit.
6. Press the
SKIP
or
SKIP
button to adjust the second or the third digit.
7. Press the
PLAY/PAUSE
button when you have selected the desired track to play.
NOTE: -
Pressing pause when playing on the USB, it may cause distorted lyrics on the
screen, any distortion will remain until the whole screen is refreshed during an instrumental
break or you stop the song and start it from the beginning
SEARCH (For MP3 file only)
When playing a MP3 file on the USB, you can press and hold the
SKIP
buttons
in the forward or reverse direction. By releasing the button, normal play will be resumed.
