Akai DV-P3410 Operator'S Manual Download Page 2

Dear Customers

May we take this opportunity to thank you for
purchasing this DVD/VIDEO CD/CD player.
We strongly recommend that you carefully study the
operating instructions before attempting to operate the
unit and that you note the listed precautions

Safety Information

• Note: This unit can be used only where the power supply is
AC 110-240V, 50/60 Hz. It cannot be used elsewhere.

•    

CAUTION

:

•  

DVD  PLAYER  IS  A  CLASS  1  LASER  PRODUCT.

HOWEVER THIS PLAYER USES A VISIBLE LASER
B E A M   W H I C H   C O U LD   C A U S E   H A Z A R D O U S
RADIATION EXPOSURE IF DIRECTED. BE SURE TO
O P E R AT E   T H E   P L AY E R   C O R R E C T LY   A S
INSTRUCTED.

•   

WHEN THIS PLAYER IS PLUGGED TO THE WALL
OUTLET, DO NOT PLACE YOUR EYES CLOSE TO
THE OPENINGS TO LOOK INTO THE INSIDE OF THIS
PLAYER.

•  

USE   OF  CONT ROLS   OR  ADJU STME NTS  OR

PERFORMANCE OF PROCEDURES OTHER THAN
THOSE  SPECIFIED  HEREIN  MAY  RESULT  IN
HAZARDOUS RADIATION EXPOSURE

•   

DO NOT OPEN COVERS AND DO NOT REPAIR BY

YOURSELF  REFER  SERVICING  TO  QUALIFIED
PERSONNEL.

•    

WARNING

:

•  

 TO REDUCE THE RISK OF FIRE OR ELECTRIC  SHOCK

DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR
MOISTURE.

•   

TO  REDUCE THE  RISK OF  FIRE OR  ELECTRIC.

SHOCK AND ANNOYING INTERFERENCE, USE THE
RECOMMENDED ACCESSORIES ONLY.

Precautions

Please read these precautions before operating this unit.

   Power cord protection

To avoid any malfunctions of the units, and  to protect
against  electric  shock,  fire  or  personal  injury,  please
observe the following:

    Hold the plug firmly when connecting or disconnecting

the AC power cord to this unit.

    Do not connect or disconnect the AC power cord when

your hands are wet.

    Keep the AC power cord away from heating appliances.

    Never put any heavy object on the AC power cord.

    Do not attempt to repair or reconstruct the AC power

cord in any way.

   Placement

Avoid placing the unit in areas of:

•    

Direct  sunlight  or  heating  radiators,  or  closed

automobiles

    High temperatures (over 35°C or high humidity (over

90%)

    Much dust;

    Vibration, impact or where the surface is tilted as the

internal parts may be seriously damaged.

   Non-use Periods

   When the unit is not being used, turn the unit off.

   When left unused for a long period of time, the unit

should  be unplugged from the household AC outlet.

   No fingers or other objects, inside

  Touching internal parts of this unit is dangerous, and

may cause serious damage to the unit. Do not attempt
to disassemble the unit.

    Do not put any foreign object on the disc tray.

   

Keep away from water/magnet.

   Keep the unit away from flower vases, tubs, sinks,etc.

If liquids are soiled into tie unit serious damage could
occur.

   Never bring magnetic objects such as speakers near

      to this unit.

• Stacking

    Place the unit in a horizontal position, and do not place

anything heavy on it.

    Do not place the unit on amplifiers or other appliances

which may become hot.

 

Condensation

Moisture may form on M lens in tie following conditions.

    Immediately after a heater has been turned on.

    In a steamy or very humid room.

    When the unit is moved from a cold environment to a

      warm one.
If moisture forms inside this unit, it may not operate properly.
In this case, turn on the power and wait about one hour
for the moisture to evaporate.

 

If there is noise interference on the TV while a broadcast

Is being received

Depending  on  the  reception  condition  of  the  TV,
interference may appear on the TV monitor while you are
watching a TV broadcast and the unit is left on. This is not
a malfunction of the unit or the TV. To watch a TV broadcast,
turn off  the unit.

The exclamation point within the triangle is a
warning sign alerting the user of important in-
structions accompanying the product.

The lightening flash with arrowhead symbol
within the triangle is a warning sign alerting
the user of “dangerous voltage” inside the unit.

To reduce the risk of  electric shock, do not
remove the cover. No user serviceable parts
inside the unit. Refer all servicing to qualified
personnel.

This  unit  employs  a  laser. Only  a  qualified
service person should remove the cover or at-
tempt to service this device, due to
possible eye injury.

Invisible  laser  radiation  when  the  unit  is
opened or interlocks defeated. Avoid exposure
to laser beam. Use of controls, adjustments
or  procedures  other  than  those  specified
herein  may  result  in  hazardous  radiation
exposure.

1

Summary of Contents for DV-P3410



























Reviews: