50
Introducing the LCD LED TV
Do not use caustic cleaners (porcelain, stainless steel, toilet, or oven cleaner
etc.) on the remote, as it may suffer damage.
Use a supplied antenna cable to connect the VHF/UHF signal to the LCD LED TV’s ANT.
terminal (refer to page 56-60).
Connect the AC-DC adapter at the back of the TV and connect the power cord to wall outlet.
Insert the batteries not supplied in remote control.
Connect other an external AV device (refer to page 61-66).
Step1
Slide the back cover up to open the
battery compartment of the remote
control.
Step2
Insert two AAA size batteries.
Make sure to match the (+) and
( - ) ends of the batteries with
the (+) and ( - ) ends indicated
in the battery compartment.
Slide the cover back into place.
How to setup the TV
