R E M O T E C O N T R O L O P E R AT I O N :
If the remote control
conflicts
with other devices, the
operation will be affected. Do not simultaneously
press buttons on the unit and the remote control.
Avoid using two remote controls at the same time as this
wiII cause a malfunction. Use only UM-4 ``AAA`` size
batteries. Do not mix old batteries with new ones.
If the batteries Ieak, clean thoroughly before replacing with new ones.
Do not short two terminals of the batteries. Dispose of old batteries in a suitable place.
NORMAL FUNCTION
1. Be sure to switch off the power and to connect to corresponding input jacks.
2. Turn on the power and wait 3-4 seconds until the speaker functions are
connected.
3. Select an audio source by pressing the INPUT A key on the front panel to
display AUX A, BT-A, FM, USB A. Press the INPUT B key on the front panel to
display LINE, USB B.
4. Adjust the VOLUME/MULTI knob on the front panel or the VOL+/- key on the
remote control to adjust the setting of the main volume,
treble, bass
.
Then
turn the left push shot to adjust the volume of INPUT A, turn the right push
shot to change the volume of the INPUT B.
5. Press the MENU key on the front panel to display BASS, TREBLE, XDRIVE,
AUTO, MAIN then adjust the VOLUME knob to change music treble, bass,
light mode and sound effect.
6. PHONES OUTPUT selection. Press the PHONES MODEL button on the front
panel to display
I N P U T
A ,
INPUT B, or
INPUT AB.
PHONES VOLUME adjustment. Press the PHONES MODEL button on the
front panel to display INPUT A or INPUT B or INPUT AB, then rotate the
VOLUME/MULTI knob to adjust the PHONES VOLUME of INPUT A or INPUT
B or INPUT AB
7. Press the LIGHT button on the remote control or press the MENU button on
the front panel to display light mode, then press the VOLUME/MULTI knob to
change the OFF, R, G, B, RG, RB, GB, RGB, AUTO, DEMO light mode.
8. Press the MUTE key to mute, press it again to reset.
Press X DRIVE on the remote to turn
on/off X-Bass effect.
LIGHT COLOR CONTROL FUNCTION
To control the light mode coming from the speaker panels by "Speaker"
menu or "light model" button on remote control