GENERAL OPERATION (continued)
Channel Selection
Pressing the CH-/CH+ buttons can select another lower-numbered
or
upper-numbered channel.
Direct selection
To select a one-digit channel number
Press the DIGIT button to choose "-" firstly, then press one of 0-9 buttons.
To select a two-digit channel number
Press the DIGIT button to choose
"
--
"
firstly, then enter
a
first-digit and second-digit.
To select a three-digit channel number
Press the DIGIT button to choose
"---"
firstly, then enter a first-digit, second-digit and third-digit.
Note:
Please
finish
entering within 6 sec.
Recall
Press the RECALL button and the TV will directly skip back to the former signal source reception mode.
TV/AV Selection
In the TV mode, press the TV/AV button to enter the
AV
mode. In the
AV
mode, the
TV
receives
AV
signals from external equipment and automatically cuts off signals from the antenna terminal.
To
resume
broadcast viewing, press the TV/AV button repeatedly or CH-/CH+ buttons. To receive signals from
external equipment, please select the relevant AV mode.
MENUS OPERATION
Menus
Press the
MENU
button repeatedly when watching TV programes, and the TV will display seven kinds of
menus (including PICTURE, TIMER, SETUP, TUNE, SWAP, HOTEL and BIORHYTHM) cyclically. Press
the
CH+ /CH-
buttons to select an adjustment (the characters turn white to cyan), and press
the
VOL-
/VOL+ buttons to adjust.(Press the HELP button, and the operation hint will appear
on
the upper-right
corner of the menu.)
Menu
selections are omitted in the following function with
those
buttons of the same name on
the
remote
control.
If
your remote control becomes invalid or lost, you can use many basic functions by pressing
the
buttons on the TV.
Menu
display disappears 6 sec after last selection.
Note: ln the AV mode, TUNE menu and SWAP menu are
not
available.
5
