![Akai CE7200 Instruction Manual Download Page 7](http://html.mh-extra.com/html/akai/ce7200/ce7200_instruction-manual_2884582007.webp)
11
TROUBLE SHOOTING
N
O
I
T
U
L
O
S
E
S
U
A
C
E
L
B
I
S
S
O
P
M
E
L
B
O
R
P
No power when
POWER is on
AC/DC adaptor is not plugged into a
wall outlet or the connector is not
plugged into the power supply jack
on the back of the unit.
Plug the AC/DC adaptor into a wall
outlet and plug the connector into
the supply jack on the unit.
No power when
plugged in
The AC outlet may not have power.
Check the outlet with a working
lamp or other electrical appliance.
No sound when
playing audio via
Bluetooth
Your Bluetooth device has not been
paired properly.
Pairing your Bluetooth device
according to the “pairing your
bluetooth device” section.
The volume control of your Bluetooth
device is set at too low.
Increase the volume of your
Bluetooth device.
The volume control of the Bluetooth
speaker is set at too low.
Increase the volume of the
Bluetooth speaker by pressing the
Volume “+” button.
No sound when
playing audio via Aux
Audio cable has not been connected
properly.
Check the connection of audio
cable at the Bluetooth cable and
the audio device.
Audio cable has breakage.
Use another audio cable for
connection.
The volume control of your Bluetooth
device is set at too low.
Increase the volume of your
Bluetooth device.
The volume control of the Bluetooth
speaker is set at too low.
Increase the volume of the
Bluetooth speaker by pressing the
Volume “+” button.
Sound comes from
only one speaker
when playing audio
via Aux
Mono audio cable is used.
Make sure the audio cable is a
stereo type.
The audio cable was damaged.
Replace the audio cable of stereo
type.
The person whom you
call via speakerphone
cannot hear your
voice clearly.
You are not facing to the front side of
the Bluetooth speaker.
Face to the front side of the
Bluetooth speaker.
You are too far from the Bluetooth
speaker.
Close to the front side of the
Bluetooth speaker.
12
SPECIFICATION
Power Supply Rating (AC/DC Power Adaptor)
Bluetooth QD ID
Input: 100 – 240VAC, 50/60Hz, 0.5A
Output: 9VDC, 2A
Audio Section
8 ohms
5 watts + 5 watts (RMS)
Output Power
Output Impedance
Dimensions
15.1”L x 7.0” W x 7.4”H
(384mm x 178mm x 187mm)
Weight
3.36 lb. (1.525 kg)
B019905
The
Bluetooth
®
word mark and logo are registered trademarks owned by Bluetooth SIG, Inc., and any
use of such marks by Arts Digital Technology
for AKAI is under license.
Power Consumption
Working Mode : 15W
Standby Mode : < 0.5W
Summary of Contents for CE7200
Page 1: ......