4
power On/Off Button
Press the [ / MUTe] button to turn the unit
on when the vehicle ignition switch is on.
Press and hold the button to turn the unit off.
adjust Volume level
rotate the [VOLUMe] knob to adjust volume
level. rotate it clockwise to increase and
anticlockwise to decrease the volume.
audio Mute
Press the [ / MUTe] button to mute the
volume from the system. “MUTe” will appear
on the display panel and the volume will be
muted. Press the [ / MUTe] button again, or
adjust the volume level to cancle MUTe mode.
audio controls
To adjust the bass, treble, balance and fader,
press the [VOLUMe] knob repeatedly until
the appropriate audio control appears on the
display panel. Within five seconds, rotate
the knob to adjust the audio settings for the
selected function.
Mode Button (src)
Press the [SrC] button repeatedly to change
following mode: radio, USB (when USB is
connected), Card(when SD/MMC card is in),
I-mode(when iPhone is connected) or AUX
play.
auxiliary input
To access an auxiliary device:
1. Connect the portable audio player to the
AUX interface on the front panel.
2. Press the [SrC] button to select AUX mode.
3. To cancel AUX mode, press [SrC] again.
Display selector (Disp)
This unit can display the clock time, radio
frequenc. Ordinarily, the radio frequency or
MP3/WMA track indication is displayed, but
the unit will display the time when the [DISP]
button is pressed. The time will display for
approximately 5 seconds then return to
previous mode.
setting the clock
The correct time of day can be set by pressing
and holding the [
Disp] button.
To set the clock, perform the following steps:
1. Press the [DISP] button to view the clock.
2. With the clock visible on the display, press
and hold the [DISP] button until the time
display flashes.
3. Within 5 seconds, rotate the knob counter
clockwise to adjust the minutes to the
desired setting. To change the hour, rotate
the knob clockwise to adjust the hour to the
desired time.
4. Press [DISP] to confirm.
general Operation
