background image

42 

IMPORTANT 

 

 

 

CAUTION:

 To reduce the risk of electric shock, do not remove 

any cover. No user-serviceable parts inside. Refer servicing to 
qualified service personnel only. 

 

 
 
 

This symbol is intended to alert you to the presence of dangerous voltage inside the product that 
presents a risk of electric shock. Do not open the product’s case. 

 

 
 
 

The exclamation point within the equilateral triangle is intended to alert the user to the presence of 
important operation and maintenance (servicing) instructions in the literature accompanying this 
appliance. 

 
 

POWER-CORD CAUTION 

Handle the power cord by the plug. Do not pull out the plug by tugging the cord and never touch the power cord 

when your hands are wet as this could cause a short circuit or electric shock. Do not place the unit, a piece of 

furniture, etc., on the power cord, or pinch the cord, Never make a knot in the cord or tie with other cords. The 

power cords should be routed such that they are not likely are not likely to be stepped on. A damaged power cord 

can cause a fire or give you an electrical shock. Check the power cord once in a while. When you find it damaged, 

ask your nearest authorized service center or your dealer for a replacement. 

 

 

HANDLING PRECAUTIONS 

1.Install on a solid, flat surface - but not on top of a speaker. 

2.Install away from high heat, moisture, or direct sunlight. Avoid dust, dirt, smoke and steam. 

3.Install away from a TV set and tuner, To avoid interference. use an outdoor antenna or turn off the TV set and 

tuner. 

4.Moisture may condense on the turntable if it is brought from a cold area to a warm room, or if room temperature 

increases rapidly. If so, do not use until moisture evaporates: 

5.To clean records, use an antistatic spray or cleaning fluid and soft cloth. Wiping with a dry cloth or brush may 

cause static noise. 

 

 

BEFORE USE 

Check for the following parts included in the package with the main unit: 

• Operating instructions 

• 45 rpm adaptor 

• Turntable Platter 

• Slipmat 

• Dust cover 

• USB cable 

• Software CD 

 

 

 

 

 

            DO NOT OPEN
RISK OF ELECTRIC SHOCK

CAUTION

Summary of Contents for ATT01U











Reviews: