Akai ASR-95, Service Manual, Page: 3 / 21

DISASSEMBLY INSTRUCTIONS
1. Using the unlock key that came with the unit or a similar tool, unlock the Mounting Box and remove
toward the rear of the unit.
2. Remove the screw (A) located on the back of the top cabinet then remove the Top Cabinet.
3. Open the panel and remove the Trim Ring then remove two screws (B) from the Base.
4. Remove two screws (C) each side of the base then remove the Base.
5. Remove the screw (D) and remove the Antenna Clip.
6. Remove two screws (E) and remove the Wire Clip.
Remove two screws (F) from the Heat Sink then remove the Clip (A).
7. Remove two screws (G) from the deck front bracket and remove two screws (H) from the deck rear bracket
cabinet.
8. Remove two screws (I) from under the bottom cabinet and remove the Deck Front Bracket.
Remove two screws (J) from under the bottom cabinet then remove the Deck and the Deck Rear Bracket.
9. Remove two screws (K) from the heat sink then remove the Main Board.
10. Remove two screws (L) from the heat sink then remove the Heat Sink and the Bottom Cabinet.
3