Akai ASB70I, Operator'S Manual

Page: 35 / 44

Playing Music From Your iPod
Press PLAY on the iPod, main unit or remote. The music playback will start.
You can control all of the iPod’s functions including menu navigation from the remote control,
and to select tracks, play, pause and stop and from the main unit.
Charging your iPod
Note: Please make sure you are using the correct adaptor for your iPod and that it is properly
docked into this unit.
FAILURE TO DO SO MAYDAMAGE THE iPod.
When an iPod is inserted into the dock, it will go to standby mode then turn off.
Whilst the iPod is docked in the system, it will recharge (until fully charged).
Please note that older 3rd generation iPod cannot be charged by this unit.
Listening to your iPod
1. Insert the iPod as outlined above.
2. With the unit turned on, press the function button repeatedly until “iPod” is shown in the
display.
3. Press the Play / Pause, Stop button on the Micro System to commence, control playback
and stop.
NOTE: The volume control on the iPod will only adjust the volume of any headphones
connected to the iPod. To increase the volume when docked use the volume controls for the
Micro System.
REPEAT/
VIDEO OUT
Remote
Remote
Remote
Remote
Remote
Select iPod video output when in the
video or photo mode.
Control
Location
Function
MENU
SELECT
Main unit, remote
Main unit, remote
Main unit, remote Press once to select track
Press to play, press again to pause
Press to stop
iPod MENU function
iPod SELECT function
iPod scroll up
iPod scroll down
GB
34