10
11
ASB20I
10
11
ASB20I
iPod functions
5.2
Installing and removing an iPod
● To install an iPod:
- Press the OPEN/CLOSE button (44) to open and raise the dock.
- Wait for the docking station to raise to its highest position.
- Choose the correct dock adapter. Refer to the table below.
- Insert the dock adaptor into the dock.
- Insert the iPod into the dock adaptor.
- Press the OPEN/CLOSE button (44) to lower and close the dock.
● To remove an iPod:
- Press the STOP button (32).
- Press the OPEN/CLOSE button (44) to open and raise the dock.
- Wait for the docking station to raise to its highest position.
- Pull the iPod gently out of the dock adaptor.
- To remove dock adaptor, pull the dock adaptor gently out of the appliance.
- Press the OPEN/CLOSE button (44) to lower and close the dock.
!
CAUTION
When connecting an iPod, ensure that the correct dock adaptor is
placed.
i
● When an iPod is installed, it will go into standby mode and then switch off.
● Whilst the iPod is docked in the system, its battery is charged
automatically. When the battery is fully charged, the charging process is
completed.
