Akai AS-R8025SSP, Service Manual

Page: 2 / 10

General safety instructions Contents
To avoid the risk of an electronic shock, you should
Cover------------------------------------ ----P1
not expose the device to rain or moisture. Consequently, General safety instruction--------------P2
do not use the device in the immediate vicinity of water, Exploded view of the Subwoofer----- P3
for example near a bath tub, a swimming pool or in a Exploded view of the satellite---------P4
damp cellar. Schematic diagram-----------------------P5
Use the device only for the intended purpose. Drawing of PCB board-------------P6--P9
only connect the device at a properly installed plug so-
Part list--------------------------------------P10
cket. Pay attention that the specified voltage corres- Familiar malfunction analysis---------P11
ponds to the voltage of plug socket.
when using external mains supply, pay attention to the
correct polarity and voltage. Always place the batteries
Specification Data:
in the correct direction. RMS output:110W(35W+15W*5)
Assemble the device in such a way that the available Speaker Unit:
ventilation openings are not covered. subwoofer: 5.25"
Never open the housing of the device. Incorrect rep satellite: 3"*5
airs can consitute a considerable risk of the user. Distortion: 0.3% 1W 1KHz
Should the device become damaged, in particular the Frequency Response: 30Hz-20KHz
mains supply cable, do not operate the device any S/N Ratio: >=60dB
longer, but rather have it repaired by an expert. Seperation: >=45dB
Check the mains supply cable regularly for damage.
For safety reasons a broken or damaged mains lead
may only be replaced by an equivlent lead from the
manufacturer, our customer service department or
a similary qualified person.
These symbols may be found on the unit and are in
tended to indicate the following:
the lightning symbol should advise the user
of parts in the inside of the device which
carry dangerously high voltage level.
the symbol with an exclamation mark should
advise the user of important operation or
maintance instructions in the accompanying
documentation.
2