4
To launch a scene,
press one of the eight
Scene Launch Buttons
to the right of the 8x8
matrix of Clip Buttons.
To move around the matrix of clips,
press and hold
Shift
and press one of the
left
four Clip
Stop Buttons (
,
,
,
) to shift the viewable 8x8 matrix. In the software, this is represented
by a red rectangle around the clips.
To solo a track:
1.
Press and hold
Shift
and press the second
Scene Launch Button
(
Solo
). This puts the
Clip Stop Buttons at the bottom of the 8x8 matrix of Clip Buttons in Solo Mode.
2.
Press the
Clip Stop Button
in the same track (column) as the clip you want to solo.
To record-arm a track:
1.
Press and hold
Shift
and press the third
Scene Launch Button
(
Rec Arm
). This puts the
Clip Stop Buttons at the bottom of the 8x8 matrix of Clip Buttons in Record-Arm Mode.
2.
Press the
Clip Stop Button
in the same track (column) as the clip you want to record-
arm.
To mute a track:
1.
Press and hold
Shift
and press the fourth
Scene Launch Button
(
Mute
). This puts the
Clip Stop Buttons at the bottom of the 8x8 matrix of Clip Buttons in Mute Mode.
2.
Press the
Clip Stop Button
in the same track (column) as the clip you want to mute.
To select a track:
1.
Press and hold
Shift
and press the fifth
Scene Launch Button
(
Select
). This puts the
Clip Stop Buttons at the bottom of the 8x8 matrix of Clip Buttons in Select Mode.
2.
Press the
Clip Stop Button
in the same track (column) as the clip you want to select.
To stop all clips,
press and hold
Shift
and press the eighth (last) Scene Launch Button (
Stop
All Clips
).
To adjust volumes,
press and hold
Shift
and press the fifth Clip Stop Button (
Volume
) to put
APC mini's
Faders
in Volume Mode. The first eight
Faders
will control the volume levels of the
first eight tracks in Ableton Live.
To adjust panning,
press and hold
Shift
and press the sixth Clip Stop Button (
Pan
) to put
APC mini's
Faders
in Pan Mode. The first eight
Faders
will control the panning positions of
the first eight tracks in Ableton Live.
To adjust send levels,
press and hold
Shift
and press the seventh Clip Stop Button (
Send
) to
put APC mini's
Faders
in Send Mode. The first eight
Faders
will control the levels of Send A
for the first eight tracks in Ableton Live.
Tip:
Repeat this action to set the faders to control the levels of subsequent sends (e.g., Send
B, Send C, etc.).
To adjust devices,
press and hold
Shift
and press the eighth (last) Clip Stop Button (
Device
)
to put APC mini's
Faders
in Device Mode. The first eight
Faders
will control the eight Macro
Controls of the current device in Ableton Live.