Akai AMX Serato, Service Manual

Page: 12 / 28

!"#$%&'()%!**+,-.),/0%12/-'342'%5'6%78%
Akai AK40 Test Application Procedure
Equipment:
Quantity Item
1 RCA Cable
1 RCA to Stereo 1/8” cable
Setup:
1. Plug the device into the computer via USB
2. Connect the RCA outputs 1,2 into RCA inputs 1,2
3. Connect the headphone output into RCA inputs 3,4
4. Open the AK40 Test application with the MaxMSP Runtime
5. Set the MIDI Input and Output devices to AMX
6. Set the AUDIO Device Driver to “ad_asio Akai Professional AMX
ASIO(64)”
7. Set Input to: Internal
8. Set Output to: On
9. You should not need to use the Advanced Audio Options button
Test Procedure:
1. Set both impedance selection switches to ‘line’
2. Press the ‘Test 1’ button under ‘RUN AUDIO TESTS’
a. If test passed, this button will turn green , if failed it will turn red .
3. Set both impedance selection switches to ‘phono’
4. Press the ‘Test 2’ button under ‘RUN AUDIO TESTS’
a. If test passed, this button will turn green , if failed it will turn red .
5. Press all the buttons on the device.
a. If test passed, the button on screen corresponding to the physical
button will turn
green .
6. Move Encoder knobs (Left Gain, Right Gain, Browse) to the right and then
to the left. It is important that you move them in this order.
a. If test passed, the knob on screen corresponding to the physical
encoder will turn
green .
7. Move all potentiometer knobs to the minimum and maximum position.