Akai AKDVD10, User Manual

Page: 12 / 28

12 | OPERATION
Operation
Rotating the Screen
Place the player on a level surface and open up the monitor vertically, while holding the lower side of the
player.
• To rotate the monitor for viewing from the right side, turn it to the right slowly. It can be turned up to 90°.
• To rotate the monitor for viewing on the left side, turn it to the left slowly. Do not force it beyond 180°.
• Adjust the angle of the monitor backwards or forwards for comfortable viewing. The monitor can also be
laid flat.
NOTE: Do not store the DVD Player with the screen side facing up. This can damage the screen.
Powering the DVD Player
• This device is powered by a rechargeable lithium battery.
• To charge the battery, connect the DC jack of the AC/car adaptor to the socket and connect the adaptor to
an appropriate electrical outlet.
WARNING
: Only use the supplied AC/car adaptor for charging the DVD Player. Charging with a different
adaptor may cause damage or an explosion.
WARNING
: Do not leave the DVD player unattended while charging.
• During charging, the red LED light will illuminate indicating that the battery is being charged. It takes about
4 hours to fully charge the battery. With a full charge, the player can be used continuously for up to 120
minutes hours without recharging.